Heating buffer tank with 1 heat exchanger

Buffer storage volume: 500 liters
Diameter without insulation: 65 cm
Diameter with insulation 85 cm
Height with insulation without: 170 cm
Height with insulation 175 cm
Storage operational pressure: 3 bar/95°C
Lower heat exchanger surface: 1.6 m2
Lower heat exchanger volume: 9.8 liters
Heat exchanger operating pressure: 16 bar/110°C
Weight: 106 kg
Insulation: 10 cm polyester (material similar to wool), removable!

See the drawing for connectors.

Find the corresponding heating pad and sensors in our online store.

More information:

Buffer tank

Buffer tank with 1 heat exchanger, connection points rotated by 90 degrees, so it can be easily installed in a corner.
In this buffer tank, you store the water that circulates in your heating system and is heated by the boiler or fireplace.
You can connect the solar collector, heat pump, pellet boiler or other heating device to the lower heat exchanger.
It is necessary to connect the solar collector system with a heat exchanger, because it antifreeze circulates.
Connections on all containers, in which an electric heating pad can be installed (from 2kW to 9kW), and approx. is used to heat half the volume of the container.

If you want to heat the domestic hot water itself, i.e. the hot water flowing from the tap in the tank, choose an indirect storage tank or boiler with a heat exchanger, they are enameled or stainless, so the drinking water in them remains clean!< /span>

Legend:

1. Aesthetic PVC cover in RAL 9006
2. High-quality thermal insulation.
3. Water tank made of low carbon steel.
4. Lower heat exchanger S1.

Warranty: 3 years

< /p>

Buffer tank - 500 liter tank with 1 heat exchanger, specially CAN BE PLACED IN CORNERS, for hot water storage.

Heating buffer tank with 1 heat exchanger

Buffer tank