Heating buffer tank with 2 heat exchangers

Buffer storage volume: 500 liters
Diameter without insulation: 65 cm
Diameter with insulation 85 cm
Height with insulation without: 170 cm
Height with insulation 175 cm
Storage operational pressure: 3 bar/95°C
Lower heat exchanger surface: 1.8 m2
Lower heat exchanger volume: 9.8 liters
Upper heat exchanger surface: 1.1 m2
Top heat exchanger volume: 6.6 liters
Working pressure of heat exchanger: 16 bar/110°C
Weight: 124 kg
Insulation: 10 cm polyester (material similar to wool), removable!

See the drawing for connectors.

Find the corresponding heating pad and sensors in our online store.

More information:

Buffer tank with 2 heat exchangers

With connection points rotated by 90 degrees. the connectors.
In this buffer tank, you store the water that circulates in your heating system and that is used by the boiler or open fireplace heats.
You can connect the solar collector to the lower heat exchanger.
It is necessary to connect the solar collector system with a heat exchanger, because it circulates antifreeze.
E.g. the underfloor heating or another heating unit.
Each container has a connection in which an electric heating insert can be installed (from 2kW to 9kW), and approx. is used to heat half the volume of the container.

If you want to heat the domestic hot water itself, i.e. the hot water flowing from the tap in the tank, choose an indirect storage tank or boiler with a heat exchanger, they are enameled or stainless, so the drinking water in them remains clean!< /span>

Legend:

1. Aesthetic PVC cover in RAL 9006
2. Apply a thick primer to the buffer tank.
3. High-quality, thick, optional thermal insulation.
4. Buffer tank made of low-carbon steel.
5. Lower heat exchanger S1
6. Upper heat exchanger S2

Warranty: 3 years

Buffer tank - 500 liter tank with 2 heat exchangers, CAN ALSO BE PLACED IN A CORNER, for hot water storage.

Heating buffer tank with 2 heat exchangers

Buffer tank with 2 heat exchangers