Heating buffer tank without heat exchanger

Buffer storage volume: 500 liters
Diameter without insulation: 650 cm
Diameter with insulation: 85 cm
Height without insulation: 170 cm
Height with insulation: 175 cm
Tank operating pressure: 3 bar/95°C
Weight: 81 kg
Insulation: 10 cm polyester (material similar to wool), removable!
See the drawing for connectors.

Find the corresponding heating pad and sensors in our online store.

More information:

Buffer storage without heat exchanger

Its specialization is the placement of the connectors on one side, within a 90-degree angle, so you can access the joints even when cornered.
The steel container is not treated on the inside (it doesn't need to be!), the outside is painted with a single layer of primer. In this buffer tank, you store the water that is also circulated in your heating system.
In this the water in the closed circuit is heated directly by the boiler with a water fireplace or heat pump.
It can also be heated with an electric heating pad too.

To produce bath water (domestic hot water, DHW), you can use the hot water from the tank to heat up the tap water in the case of two heat exchanger types.

If you want to heat the domestic hot water itself, i.e. the water flowing from the tap, in the tank, choose an indirect hot water storage tank, boiler!

Legend:

1. Aesthetic PVC cover in RAL 9006
2. Apply a thick primer to the buffer tank.
3. High-quality, thick, optional thermal insulation.
4. Buffer tank made of low carbon steel.

Warranty: 3 years

< /p>

Buffer tank - 500 liter tank without heat exchanger - CAN ALSO BE INSTALLED IN CORNERS - for hot water storage. Sunsystem

Heating buffer tank without heat exchanger

Buffer storage without heat exchanger