Plate heat exchanger 20 plates 125kW with 1" external connection and support structure

Heat exchanger with support bracket

Maximum power of heat exchanger: 125kW

Rated power: 20-45 kW

Number of discs: 20

Connection: 4x 1” external thread

Nominal flow: 12 m³/h

Heat exchange surface: 0.640 m²

Operating pressure: 30 bar

Test pressure: 45-60 bar

Min. temperature: -190°C

Max. temperature: +225°C

Weight: 4.3 kg

Plate material: stainless steel 304 or 316

Slab thickness: 0.4 mm

Solder material: 99.9% Cu

DIMENSIONS:

Length (A): 286 mm

Width (B): 116 mm

Depth (F): 55 mm

Distance (C): 234 mm

Distance (D): 72 mm

Operating tips:

⋅ It is recommended to install the heat exchanger vertically

⋅The sides must be connected in countercurrent

⋅The heat exchanger must be cleaned periodically

Heat exchanger support bracket

Connector size: 1"

Connector material: copper

Heat exchanger with support structure

125kW heat exchanger

20 plate stainless design

With support structure. If you want to build a high-quality heating system, you need not only high-quality raw materials, but also a sophisticated implementation. The plate heat exchanger wall bracket is the perfect solution for this. With the help of this, the wiring system will not keep your heat exchanger on the wall or unsightly close to the wall.

Pay attention to compatibility, which depends not only on the diameter of the heat exchanger connector (1"), the distance of the stubs is also limited, you will find a detailed description below.