Solar system with 20 kWh energy storage, monocrystalline solar cell, 8 kW 3-phase inverter

Solar system with energy storage

Solar energy storage and inverter

Battery type: LiFePO4
Battery output voltage: 125-600 V
Battery capacity: 20 kWh< br />Mains voltage: 360-400 V
Mains frequency: 50/60Hz automatic detection
Maximum mains power: 8,000 VA
Maximum mains current: 12.7 A
Maximum solar panel input power: 10,400W
MPPT voltage: 125-800 V
System charging and immersion efficiency: 98.2 %
Switching time between different energy sources: 20 ms
Up to 10,000 charging cycles
Life expectancy: 10 years

Warranty: 5-year product warranty, 10-year performance warranty

Certificates: CE/TUV
Other certificates: IEC 62109-1&2, IEC 62477, EN61000, UN38,3, CEI-021

Operating range: between -15 and +50 C
Recommended operating temperature: 25 C (performance may be limited between 0 and 40 C)
Operating humidity: 5-95% (without condensation)
Water resistance: IP21

Unit dimensions:
Inverter: 600x400x820 mm 65.5 kg
Battery: 600x420x200 mm (1 pack) 54 kg< /span>
Base: 600x420x130 mm 17.5 kg

Monocrystalline solar cell

Dimensions l x w x h 1754 x 1096 x 30 mm
operating temp. range -40°C +85°C

Solar cell
type of cells monocrystalline
number of cells/module 2x60pcs

Solar panel TECHNICAL DATA
maximum power 400Wp
nominal voltage 34.2V
no-load voltage (Voc) 41.2V
rated current 11.7A
short-circuit current (Isc) 12.28A

Efficiency: 20.8%
Isolation voltage: DC 1000V
By-Pass diode 20 A
< /span>Thickness of /safety/ glass: 3.2 mm
Weight: 21.0 kg

SOLAR PANEL STANDARD TECHNICAL DATA
normal operating temp. 43°C ± 2°C
temperature coefficient Voc -0.25 %/°C
temperature coefficient Isc 0.04 % /°C
temperature coefficient power -0.34 % /°C

Solar system with energy storage

The system includes a Lenercom brand 20 kWh energy storage with a built-in 8kW 3-phase inverter and a built-in BMS system, as well as an amount of solar cells suitable for the size of the system.

What you need is the support structure, connecting wires and other installation materials that arise, as well as the contractor's labor fee.

The price of the device does not include conversion costs, if the smart meter cannot be installed between the service meter and the apartment distributor without conversion.
If the connection fails, the non-standard because of an apartment distributor, in which case the manufacturer cannot guarantee the operation until the distribution cabinet is modified in accordance with the legislation. In case of failure, the installer may charge an extra exit fee due to the repeated exit.
If you are not sure that your contractor is actually entitled to Aligvárom Kft. to install inverters distributed by, please contact our customer service.

Solar energy production is a cost-effective and sustainable solution, but the disadvantage is that the energy is available from the sun during the day. The Raja energy storage provides a solution for this. 

Don't adapt your environment to the energy source, the energy source adapts to your needs! Attention: with isolated operation, either the property must not be connected to the electrical network or use a galvanic isolator in the electrical system!