12V 24V 48V 100A Solar MPPT charge controller, with LCD display, automatic voltage detection

Solar charge controller

System voltage: 12/24/36/48 V DC, with automatic voltage detection
Battery voltage: between 8V-68V
Battery side fuse: 150A/58V
Maximum charging current: 100A
Maximum charging power:

• 1250W/12V
• 2500W/24V
• 3750W/36V
• 5000W/48V
• Max solar panel input power 200V (180V at 25C)

MPP voltage range: battery voltage +2V-144V
Tracking efficiency >99.5 %
Internal consumption 98mA/12V, 60mA/24V, 50mA/36V, 46mA/48V
Operating temperature between -25°C and 45°C
Humidity <95%
Water resistance IP20
Dimensions: 394x24x2143 mm
Reception size: 300x230 mm hole diameter 7 mm

MPPT charge controller for solar panel

In the case of a 12V solar panel, for a 12V battery and consumer.
24V- In the case of a 36V solar panel or for a 24V accumulator or consumer, but up to 200V input, the solar panels can be classified.
Automatic voltage recognition and battery charging.
Maximum current: 100A
Thanks to the MPPT control algorithm and the MSRT (multiphase synchronous rectification technology) multiphase synchronous rectifier technology, highly efficient battery charging is guaranteed. The charging power, current and automatic regulation of the controller ensure reliable operation even with oversized solar panels or at high ambient temperatures.
The charging controller is the solar panel and battery. and/or is installed between the consumer.
Monitors the battery voltage and protects against overcharging.
If both the battery and consumer are connected to it, it protects the battery from deep discharge.
LCD display informs about voltage and current.
4 different charging modes, for most types of batteries.
< /span>Insulated battery temperature compensation.
8 charge controllers can be connected in parallel to a solar panel system.
RD-485 connector with MODBUS protocol.
Suitable for large for charging batteries, supplementing the solar irrigation system
It can also be connected to acid and gel batteries.