Plate heat exchanger 20 plates 125kW 4x1 1/4" with external connection

Plate heat exchanger

Maximum power of heat exchanger: 125kW
Nominal power: 15-40 kW
Number of discs: 20
Connection: 4x 1 1/4" external thread
Nominal flow: 12 m³/h
Heat exchange surface: 0.540 m²
Operation pressure: 30 bar
Test pressure: 45-60 bar
Min. temperature: -190°C
Max. temperature: +224°C
Weight: 4.3 kg
Plate material: stainless steel 304 or 316
Plate thickness: 0.4 mm 
Solder material: 99.9% Cu

DIMENSIONS:

Length (A): 286 mm
Width (B): 116 mm< /span>
Depth (F): 55 mm
Distance (C) : 234 mm
Distance (D): 63 mm

Operation tips:
⋅ It is recommended to install the heat exchanger vertically
⋅The sides must be connected in countercurrent
⋅Periodic cleaning must be carried out on a heat exchanger

Plate heat exchanger

125kW heat exchanger
20 plate stainless design

In terms of its design, the 1 1/4" 20 plate heat exchanger stands out with its large connection diameter compared to the heat exchange surface, so it can also be used for systems that require a higher flow rate with the lowest possible resistance such systems are, for example, old central heating systems based on thicker pipes, where the installation of a 1" heat exchanger significantly narrows the system would mean.
In addition to the above, the Ba-27-20 heat exchanger can work with virtually any traditional heat source, whether it is a fireplace or a traditional fuel (coal, wood) central heating boiler or a boiler using more modern fuels, for example a pellet or condensation boiler operating in a closed system.

From a theoretical point of view, a 5/4" heat exchanger could also work with heat pumps, but this would be contradicted by an inadequate heating exchange surface, since we must remember that a fairly meticulous selection of heat exchangers is necessary for effective and for low-energy operation. If we are guided only by the size of the DN32 connector, it does not ensure the correct selection, here the surface of the plates must be taken into account. to take.