Plate heat exchanger with 12 plates 55 kW 4x3/4" external connection

Heat exchanger

Maximum output: 55kW
Nominal output: 7-20 kW
Number of disks: 12
Connection: 4x 3/4" external thread
Flow rate: 12x0.023 m2
Nominal flow: 4 m³/h
Heat exchange surface: 0.276 m²
Operating pressure: 20 bar
Test pressure: 45 bar
Min. temperature: -190°C
Max. temperature: +225°C
Weight: 1.2 kg
Plate material: stainless steel 304 or 316
Plate thickness: 0.3 mm
Solder material: 99.9% Cu

DIMENSIONS:

Length (A): 315 mm
Width (B): 73 mm< /span>
Depth (F): 35 mm
Distance (C) : 278 mm
Distance (D): 40 mm

Operation tips:
⋅ It is recommended to install the heat exchanger vertically
⋅The sides must be connected in countercurrent
⋅Periodic cleaning must be carried out on a heat exchanger

Plate heat exchanger

12 plate stainless design
The reason for introducing this heat exchanger was the demand of companies operating in the refrigeration industry , due to its very favorable dimensions (the device is only 35 mm deep). Despite this, it is not a typical heat exchanger for the refrigeration industry, it works great for small heating systems, such as 100-120 square meter single-family houses, or in heating systems supplying 10-12 kW boilers. Since the heat exchanger is not designed for large heating systems, it has 3/4" connections, which, however, provide sufficient flow when using circulation pumps. It can also work with glycol or other non-freezing fluids, which also makes it suitable for connecting separate buildings that are not heated constantly, and the risk of freezing is relatively high.