Plate heat exchanger 34 plates 135kW with 1" external connection

Heat exchanger

Maximum power of heat exchanger: 135kW
Nominal power: 25-45kW
Number of disks: 34
Connection: 4x1" external thread
Nominal flow: 8 m³/h
Heat exchange surface: 0.544 m²
Operating pressure: 20 bar
Test pressure: 45 bar
Min. temperature: -190°C
Max. temperature: +225°C
Weight: 2600 g
Plate material: stainless steel 316
Plate thickness: 0.4 mm
Solder material: 99.9% Cu

DIMENSIONS:
Length (A): 220 mm
Width (B): 90 mm
Depth (F): 85 mmDistance (C): 180 mm
Distance (D): 52 mm

Operation tips:
⋅ It is recommended to install the heat exchanger vertically
⋅The sides must be connected in countercurrent
⋅Periodic cleaning must be carried out on a heat exchanger

Plate heat exchanger

135kW heat exchanger
34 plate stainless design

Ba-16-34 plate heat exchanger can withstand a maximum operating pressure of 20 bar. It has been tested at twice this pressure, but is generally intended for systems with pressures up to 2 MPa. The Ba-16-34 model is designed for high temperature applications up to 230 degrees Celsius. Of course, these temperatures are only possible in industrial applications.
All plate heat exchangers are recommended to be cleaned at least once a year to ensure optimal performance for many years. However, the cleaning frequency may vary and should depend on the specific installation and operating conditions. Indeed, neglecting cleaning will not bring results so quickly, especially if the heat exchanger works in a relatively new heating system and if it is sized correctly (which means a little "oversized"). In the longer term, however, uncleaned heat exchangers will operate for fewer years than cleaned ones.