Tank solar collector non-pressure-resistant SD-S (SD-G) inox 300 liter 30-pipe flow-through system, stainless steel tank and frame

Non-pressure tank solar collector

Number of vacuum tubes: 30
Vacuum tube diameter: 58 mm, length: 1800 mm
Gross collector surface: 3.69 m2
Tank diameter inside 360 ​​mm Outside: 450 mm
Tank material inside: stainless! Exterior: stainless!
Thickness of polyurethane insulation: 45 mm
Collector inclination: 38 degrees
Connections:
Water inlet and outlet 3/4"
temperature sensor
Connector for optional electric heating

Warranty: 2 years

< span>

< span>

Packaging dimensions:
Container: 2550x500x515 36 kg
Vacuum tubes: 2 pcs 1880x340x250 2x33 kg
Frame: 1800x180x110 23 kg

More information:

solar collector with 300 liter non-pressure resistant inox tank

Stainless design!
HMV - domestic hot water solar collector system.
Collector equipped with stainless non-pressurized tank - good price.
The solar collector only it works with a flow-through system, a tap cannot be built after the collector. 
The large tank cannot be pressurized, but you can also find pressure-resistant tank collectors among our products, only they are more expensive.

1. For flow-through water heaters, e.g. swimming pool, agricultural or industrial water for heating..
The most affordable commodity solution. We let the cold water in, and the warm water flows out at the outlet of the overflow
which must not be closed with a tap.

2. For domestic hot water, e.g. in holiday homes.
In this case, it must be filled with water from the tap at the filling socket. Overfilling is prevented by the pipe.
The tank can be drained at the drain outlet drain the hot water with a faucet untilall the hot water is empty, so it can be used 100%.
The tank must then be refilled to heat up again.

Number of vacuum tubes: 15 58 mm thick, 1800 mm long vacuum tubes